Energy Saving Tips for the Colder Months

12/13/2019 (Permalink)

The strategies below will help you save energy, save money, and stay comfortable during the cool fall and cold winter months. Some of the tips below are free and can be used on a daily basis to increase your savings; others are simple and inexpensive actions you can take to ensure maximum savings through the Annandale winter.

Take Advantage of Heat from the Sun

Open curtains on your south-facing windows during the day to allow sunlight to naturally heat your home, and close them at night to reduce the chill you may feel from cold windows.

Cover Drafty Windows

Use a heavy-duty, clear plastic sheet on a frame or tape clear plastic film to the inside of your window frames during the cold winter months. Make sure the plastic is sealed tightly to the frame to help reduce infiltration. Install tight-fitting, insulating drapes or shades on windows that feel drafty after weatherizing.

Adjust the Temperature

When you are home and awake, set your thermostat as low as is comfortable. When you are asleep or out of the house, turn your thermostat back 10° to 15° for eight hours and save around 10% a year on your heating and cooling bills. If you have a heat pump, maintain a moderate setting or use a programmable thermostat specially designed for use with heat pumps.

Find and Seal Leaks

Seal the air leaks around utility cut-throughs for pipes ("plumbing penetrations"), gaps around chimneys and recessed lights in insulated ceilings, and unfinished spaces behind cupboards and closets. Add caulk or weather stripping to seal air leaks around leaky doors and windows.

Maintain Your Heating Systems

Replace your filter once a month or as needed for furnaces and heat pumps. Wood- and Pellet-Burning Heaters need to have the flue vent cleaned regularly and the inside of the appliance cleared out with a wire brush periodically to ensure that your building is heated efficiently.

Lower Your Water Heating Costs

Turn down the temperature of your water heater to the warm setting (120°F). You'll not only save energy, you'll avoid scalding your hands.