If you have a fire or water emergency, please call us now at (703) 237-8800

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Methods of Fire Restoration

12/13/2019 (Permalink)

Team SERVPRO® Uses Appropriate Cleaning Methods When Dealing with Soot and Other Damage After a Fire.

After a fire damage incident, the smoke particles that move around the structure can negatively impact ceilings and walls in many ways. To prevent permanent or further damage, you need to take immediate action, and it is not advisable to do the cleaning by yourself. Not all fire events are the same, and that calls for professional help to determine the most suitable restoration procedures for your property. 

Specific factors guide our SERVPRO® technicians when selecting the most appropriate technique after a fire damage incident. For instance, if we are cleaning walls and ceilings, we look at the type of smoke residues, the nature of the surface, and whether the area is dry cleanable or wet cleanable. Peroxide active cleaning, wet cleaning, and dry cleaning are the primary cleaning methods that we use. 

Our SERVPRO® technicians use dry cleaning when cleaning surfaces that have non-oily smoke residues. In this method, we use a dry clean sponge to do the job, and it is among the initial steps that we perform before extensive cleaning starts. If we need to remove light to heavy smoke residues from wooden, metal, and painted ceilings, then wet cleaning is an option. 

Peroxide active cleaning is a suitable method for cleaning greasy particles that are on acoustical ceilings and other forms of nonporous and porous ceilings. We prefer this method when there are chances of dissolving the coating on textured ceilings through aggressive wet cleaning methods. The method also preserves the appearance of blown tiles. 

When our SERVPRO® technicians are dry cleaning your property, we usually start by cleaning the ceilings before moving to the walls to avoid introducing dirt to clean areas. To avoid streaking the walls with the cleaning solution during wet cleaning, we start by cleaning the walls and then move to the ceilings. We also clean walls from the bottom to the top when performing wet cleaning. 

Other News

View Recent Posts